Pace Zones; Power Zones - Suunto 9 PEAK PRO User Manual

Suunto 9 Peak Pro
5. Tap your selection or press the middle button.
6. To exit the HR zones view, swipe right or keep the middle button pressed.

4.12.2. Pace zones

Pace zones work just like HR zones but the intensity of your training is based on your pace
instead of your heart rate. The pace zones are shown either as metric or imperial value
depending on your settings.
Suunto 9 Peak Pro has five default pace zones that you can use or you can define your own.
Pace zones are available for running and cycling.
Set pace zones
Set your activity specific pace zones from the settings under Training » Intensity zones »
Advanced zones.
1. Tap Running or Cycling or press the middle button.
2. Swipe or press the lower button and select pace zones.
3. Swipe up/down or press the upper or lower buttons and press the middle button when the
pace zone you want to change is highlighted.
4. Select your new pace zone by swiping up/down or by pressing the upper or lower
buttons.
5. Press the middle button to select the new pace zone value.
6. Swipe right or press and hold the middle button to exit the pace zones view.

4.12.3. Power zones

Power meter measures the amount of physical effort needed to perform a certain activity. The
effort is measured in watts. The main advantage gained with a power meter is precision. The
power meter reveals exactly how hard you really work and how much power you produce. It
is also easy to see your progress when analyzing the watts.
Power zones can help you train with the correct power output.
Suunto 9 Peak Pro has five default power zones that you can use or you can define your own.
Power zones are available in all default sport modes for cycling, indoor cycling and mountain
biking. For running and trail running, you need to use the specific "Power" sport modes to get
power zones. If you are using custom sport modes, make sure your mode uses a power POD
so that you also get power zones.
Set activity specific power zones
33