Adding Toner - Kyocera KM-6330 Operation Manual

3. Adding toner

Add toner when "Add toner" is displayed. Although a few copies can
still be made once this message is displayed, you should add toner as
soon as possible.
* DO NOT add toner unless this message is displayed.
* Touch the "Adding toner" key to have the procedure for adding toner
displayed on the touch panel.
Inch specifications
Ready to copy.
Add toner.
1
11x8 / "
2
APS
Plain
1 / Bypass
11x8 "
2
Colour Plain
11x8 1 / "
2
Plain
Basic User choice
Metric specifications
Ready to copy.
Add toner.
APS
Plain
Bypass
Color Plain
Plain
Basic User choice
CAUTION
DO NOT attempt to incinerate the toner bottle or the
waste toner box. Dangerous sparks may cause
burns.
CAUTION
DO NOT attempt to force open or destroy the toner
bottle or the waste toner box.
1 Open the cover on the right side of the operation panel.
Paper Size
11x8
Sort:Off
AMS
Auto
Sort:On
Exposure
Reduce Exposure Sort/
/Enlarge mode Finished
Function Program
Paper Size
Sort:Off
AMS
Auto
Sort:On
Exposure
Reduce/ Sort/
Exposure
Enlarge mode Finished
Function Program
2 Turn the new toner bottle upside down and tap the bottom
portion about 10 times or so.
Set
1 / "
2
Combine
Orig.image
quality
Reduce
/Enlarge
Adding
toner
3 Hold the bottle firmly and shake up the contents by turning it
upside down and then right-side up 10 or more times in the
Set
manner shown in the illustration.
Merge copy
Image
quality
Reduce/
Enlarge
Adding
toner
4 Next, hold the bottle horizontally and shake it back and forth
10 or more times.
Fit the hole in the toner bottle (located below the N) over the
5
metal pin (shown as 1 in the illustration) that is protruding out
of the toner supply slot.
Section 3 PREPARATIONS
1
3-9