Kyocera KM-6330 Operation Manual page 187

● Paper type (auto paper selection mode)
Perform the following procedure to set which types of paper can be
selected under the auto paper selection mode.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-39.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select "Select paper type(APS)" in the settings list on the left
side of the touch panel and then touch the "Change #" key.
The "Select paper type(APS)" screen will be displayed.
Inch specifications
Default setting
Copy default
Default menu
Original size(custom 4)
Eco Print
Correct. fine black line.
Selectpaper
Select paper type(APS)
Default setting
Metric specifications
Default setting
Copydefault
Default menu
Originalsize(custom 4)
Eco Print
Correct. fine black line.
Selectpaper
Select paper type(APS)
Default setting
Language Management
Bypass BOX
setting Management
Print
report
Language Management
Bypass
Hard Disk
setting
Management
Print
report
Setting mode
Off
Off
APS
Change #
Off
Setting mode
Off
Off
APS
Off Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Touch the "On" key and then touch the key that corresponds
to the types of paper you want to allow to be used under the
auto paper selection mode. If you do NOT want to limit the
types of paper that will be available for use in that mode,
touch the "Off" key.
Inch specifications
Select paper type(APS)
End
Weekly
timer
Default setting - Copy default
Metric specifications
Select paper type(APS)
End
Week
timer
Default setting - Copy default
NOTES
• It is possible to select the type of paper that has been designated for
the drawer[cassette] currently in use.
• If you want to quit the displayed setting without changing it, touch
the "Back" key. The touch panel will return to the screen in step 2.
Close
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
Up
Down
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Select paper type(s) for Auto Paper Selection.
Plain Color Custom 1
Off
Prepunched
Preprinted Custom 2
On Rough
Recycled Custom 3
Letterhead Bond Custom 4
Select paper type(s) for Auto Paper Selection.
Custom 1
Plain Colour
Off Preprinted Custom 2
Prepunched
Custom 3
Recycled Rough
On
Letterhead Bond Custom 4
Back Close
Custom 5
Custom 6
Custom 7
Custom 8
Back Close
Custom 5
Custom 6
Custom 7
Custom 8
7-47