Kyocera KM-6330 Operation Manual page 116

Section 5 OTHER CONVENIENT FUNCTIONS
% Selecting the location of copy ejection
If the optional Document Finisher or Multi Job Tray is installed on your
copier, this procedure lets you select the location for the ejection of
finished copies.
1
Touch the "Edit" key. Then, in the resulting screen, touch the
"Select of Output" key. The "Select of Output" screen will be
displayed.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Job Build - Step1
Off Auto
Border Select
Erase orig.size
None None
Margin/
Page #
Centering
Basic Quality
Metric specifications
Ready to Job build.
Set original. Press Start key.
Job Build - Step1
Off Auto
Erase Select
size orig.
Mode
None None
Page
Margin/
Imag.shift numbering
Basic Quality
NOTES
• This setting will only be displayed when the optional Document
Finisher or Multi Job Tray is installed on your copier.
• The setting in regard to the location of copy ejection can only be
made in the first step of the job build mode and will apply to all
steps in the copy job.
2
Select the desired location for the ejection of finished copies.
Inch specifications
Ready to Job build.
Place originals then press Start key.
Select of Output
Auto
Tray A
Tray 1
Tray 2
Metric specifications
Ready to Job build.
Set original. Press Start key.
Select of Output
Auto
Tray A
Tray 1
Tray 2
3
Touch the "Close" key. The touch panel will return to the
screen in step 1.
5-70
Off
Modify
Copy
2 sided copy-Left
Tray A
Finished page # : 0
Select of
Output
Edit
None
Modify
copy
2-sided Copy-Left
Tray A
Finished page #: 0
Select of
Output
Edit
Back
Tray 3
Select proper output tray to avoid
Tray 4 mixing job.
You can confirm output tray with output
management.
Tray 5
Back
Tray 3
Select proper output tray to avoid
job mixing.
Tray 4
You can confirm output tray with output
management.
Tray 5
Set
End
Insert page
Print from
Rear page
Set
End
Insert
blank page
Print from
Rear page
Set
Close
Set
Close