Accessing The Copy Management Mode Settings - Kyocera KM-6330 Operation Manual

(2) Accessing the copy management mode settings

Perform the following procedure when you want to access the
screens for each of the various copy management mode settings.
1 With the content of the "Basic" tab displayed, press the [ ]
key. The "Default setting" screen will be displayed.
2 Touch the "Management" key on the right side of the touch
panel.
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
End
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
report
End
Week
Language Management
timer
Bypass Hard Disk
setting
Management
Print
report
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is "6300" and
for 75 cpm copiers is "7500". If the entered code matched
the registered one, the "Management code menu" screen will
be displayed.
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
4 Touch the key that corresponds to the desired copy
management mode setting.
The screen for that setting will be displayed.
Inch specifications
Management menu
Management code menu
Counter Print
by ID-code the list
Print
Err. PRT.
Default setting
Metric specifications
Management mode
Management code menu
Counter Print
by ID-code
the list
Print
Err. PRT.
Default setting
NOTES
• It is possible for you to change the 4-digit management code.
(See "Changing the management code" on page 7-34.)
• Refer to the desired procedure(s) explained under "(3) Making copy
management settings" and perform the corresponding setting(s).
Close
Close
Close
c o py P r i n t e r
ID-code
Reg./Del.
# of copy
correct
Off
Off
Counter
On
On
clear
Close
C o py P r i n t e r
ID-code
Reg./Del.
# of copy
correct Off Off
counter
On
On
clear
7-3