Kyocera KM-6330 Operation Manual page 242

Section 9 TROUBLESHOOTING
• Misfeed in the optional Side Feeder
If the message below is displayed, a misfeed has occurred in the
optional Side Feeder. Perform the following procedure to remove the
jammed paper.
Inch specification
Paper misfeed.
JAM 00
Metric specification
Paper misfeed.
JAM 00
1 Disconnect the Side Feeder from the main body of the
copier.
2 If there is any jammed paper inside the coupling area
between the Side Feeder and the copier, remove it.
9-12
1.Remove paper from between Copier and
Side Paper Deck.
2.Reset Side Paper Deck to Mainframe.
1.Remove paper from between copier and
side feeder.
2.Reset side feeder to mainframe.
3 Reconnect the Side Feeder to the copier.
If there is any jammed paper inside the Side Feeder, go to
the next step.
4
Open the upper cover to the Side Feeder.
5 Remove the jammed paper.
6
Close the upper cover to the Side Feeder.