General Information - Kyocera FS-C5015N Advanced Operation Manual

Using the Operator Panel

General Information

2-2
This chapter provides the information you need to configure the Ecosys
Color printer. In general you need to use the operator panel only to make
default settings. You can make most changes to the printer settings using
the printer driver through the application software.
NOTE:
Changes to printer settings made using a software application
override changes made using the operator panel.
You can also rely on other printer utilities such as KM-NET for Clients if you
need to change settings that are not available on the printer driver. It will
allow remote access to printer settings. Printer utilities are supplied in the
CD-ROM supplied with the printer.
The chapter describes the operator panel in detail, including its menus and
the procedures for changing various printer settings.
ADVANCED OPERATION GUIDE