Setting The Mp Tray Paper Type - Kyocera FS-C5015N Advanced Operation Manual

Using the Operator Panel

Setting the MP Tray Paper Type

2-62
A5
B5
ISO B5
7
When the desired paper size is displayed, press [OK] ([ENTER]). The
paper size is set for the MP tray.
8
To exit the menu selection, press [MENU].
By setting a paper type (plain, recycled, etc.) for the MP tray, you can
select the paper on the MP tray according to the paper type you command
on the printer driver. The default setting is plain paper.
For more information about paper types that can be fed from the MP tray,
see Paper Availability on page 1-2.
1
Press [MENU].
2 Press or repeatedly until Paper
Handling > appears.
3 Press .
4 Press or repeatedly until >MP Tray
Type appears.
5 To change paper type, press [OK]
([ENTER]). A blinking question mark (?)
appears.
6 Press or to display the desired paper type. The message display
toggles through the following paper types:
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Paper Handling >
>MP Tray Type
Plain
>MP Tray Type
? Plain
ADVANCED OPERATION GUIDE