Setting Mp Tray Paper Size - Kyocera FS-C5015N Advanced Operation Manual

Setting MP Tray Paper Size

ADVANCED OPERATION GUIDE
When you use the MP tray in cassette mode, you should set the MP tray
size to the paper size that is used to format the job to print. If the sizes do
not match, printing will not be performed on the correct size paper. The
default setting is Letter size for the U.S. and Canada and A4 for other
countries. For more information about the paper sizes that you can feed
from the MP tray, see Paper Specifications on page 1-2.
NOTE:
Feeding the paper having a paper size which does not match the
current paper size from the MP tray can cause paper jam.
1
Press [MENU].
2 Press or repeatedly until Paper
Handling > appears.
3 Press .
4 Press or repeatedly until >MP Tray
Size appears. In this example, the current
MP tray paper size is A4.
5 To change the paper size, press [OK] ([ENTER]). A blinking question mark
(?) appears.
6
Press or to display the desired paper size. The message display
toggles through the following paper sizes:
A4
Executive
Letter
Legal
Custom
Hagaki
OufukuHagaki
Oficio II
Statement
Folio
Youkei 2
Youkei 4
16K
Env. Monarch
Envelope #10
Envelope #9
Envelope #6
Envelope DL
Envelope C5
A6
B6
Using the Operator Panel
Paper Handling >
>MP Tray Size
A4
2-61