Expansion Memory Modules - Kyocera FS-C5015N Advanced Operation Manual

Expansion Memory Modules

ADVANCED OPERATION GUIDE
To expand the printer memory for more complex print jobs and faster print
speed, you can plug in optional memory modules (dual in line memory
modules) in two memory slots provided on the printer main controller
board. You can select additional memory modules from 64, 128, 256 or
512MB. The maximum memory size is 1024MB (512MB x 2).
A 128MB memory module is already installed at the factory. To expand
memory up to 1024MB, remove the 128MB memory module and install two
512MB memory modules.
NOTE:
The expansion memory should only be installed by your service
technician. We shall not be liable for any damages caused by improper
installation of expansion memory.
Precautions for handling the printer's main controller board and memory
modules
To protect electronic parts, discharge static electricity from your body by
touching a water pipe (faucet) or other large metal object before handling
the memory modules. Or, wear an antistatic wrist strap, if possible, when
you install the memory modules.
Always hold the main controller board or a memory module by its edges as
shown below to avoid damaging electronic parts.
Options
YES
NO
3-3