Changing The File Server; Changing Print Queues - Kyocera FS-600 User Manual

4.5.1 Changing the File Server

You can specify a file server as the current one. To change the file server, use the
following procedures:
1. Log into the current file server and start the PCONSOLE utility.
2. Select Change Current File Server from the Available Options menu.
3. Press the Insert key to display the available file servers.
4. Select the file server you want as the current one and press ENTER.
5. Enter your username and press ENTER. If the username requires a password, the
Password screen is displayed. Enter the password and press ENTER.
6. Select Change Current File Server from the Available Options menu. A list of
the attached file servers is displayed.
7. Select the current file server from the File Server/Username screen.

4.5.2 Changing Print Queues

When you print a file, your system sends the file to a print queue. The print server
assigned to that queue extracts the print job and sends it to the assigned printer. If a
print server is servicing queues on multiple file servers, you must assign queues to the
printer on each file server. To change the print queues, use the following procedures:
1. Start the PCONSOLE utility.
2. Select Print Server Information from the Available Options menu.
3. Select the print server from the list.
4. Select Print Server Configuration from the menu.
5. Select Queues Serviced by Printer from the menu.
6. Select a printer from the Defined Printers list.
7. Press INS at the File Server/Queue/Priority screen. The Available Queues list
appears.
8. Select a queue from the list.
9. Press ENTER at the Priority screen to leave the priority setting at 1.
The highest priority queue is 1; 10 is the last. To change the priority of a queue,
press ENTER at the File Server/Queue/Priority screen to display the Priority
setting screen. Press the back-arrow key to delete the current setting. Type a new
number from 1 to 10 and press ENTER.
Repeat steps 7, 8, and 9 to assign additional queues to the printer.
10. Press the ESC key and save all changes.
NetWare Configuration 4-23