Chapter 2 Hardware Installation; Supported Kyocera Printer Models; Ecolan 2000E Hardware Installation - Kyocera FS-600 User Manual

2.1 Supported Kyocera Printer Models

The EcoLAN 2000E is compatible with the FS-600, 800, 1700+, 3700+, LS-6700 and
any other Kyocera printer with the new slide-in interface.
The EcoLAN 2000E is NOT compatible with previous FS/LS-Series models,
including, FS/LS-400, 850, 1500/A, 1550/A/+, 1600/A/+, 1700, 3400/A/+, 3500/A,
3600/A/+, 3700, 5500, 6500/+.
The EcoLAN 2000E is compatible with the FS/LS-7000 with a Software version of
25.05 or later. The Software version is displayed on the printer status page. The FS/
LS-7000 also includes an older daughter board style interface in addition to the slide-
in interface. The slide-in interface on the FS/LS-7000 may be used for either a
network interface card or an optional hard drive. Thus, if the EcoLAN 2000E is
installed in the FS/LS-7000, there is no available slot for the optional hard drive.

2.2 EcoLAN 2000E Hardware Installation

The EcoLAN 2000E is a new slide-in interface board which does not require the
removal of the printer's main board for installation. This section includes instructions
for installation into 1) the FS-600, and 2) the FS/LS-7000. These instructions would
be similarly applicable to comparable Kyocera printer models with the slide-in
interface.
Hardware Installation
2
Hardware Installation 2-1