How To Install Map In Windows; Using Map; Extensive On-Line Help - Kyocera FS-600 User Manual

3.1.1 How to Install MAP in Windows

The MAP setup program may be launched from the same Acrobat .PDF files which
were used to access this manual or may be run directly from the CD ROM using the
following procedure:
1. Insert the CD ROM included with the EcoLAN 2000E.
2. These instructions assume D is the drive letter of your CD ROM. Substitute the
appropriate drive letter if necessary for your system.
• For Windows 95 or NT 4.0, click the Start button, select Run, and type:
D:\MAP\SETUP.EXE
• For Windows 3.1, Windows for Workgroups 3.11, or Windows NT 3.51, from
Program Manager under File, select Run, and type: D:\MAP\SETUP.EXE
3. Follow the setup program prompts.

3.1.2 Using MAP

When you click on the Management Access Program in Windows to start the program,
the program will display a list of EcoLAN 2000E units designated by their SAP
identification (KYO followed by the unit's six digit serial number). Select the 2000E
you want to access. The program will setup a link to the 2000E and display its home
page.
To display the EcoLAN 2000E print server name in addition to the SAP ID for a single
unit:
1. Select an EcoLAN 2000E from the Server list.
2. Select Show Detail from the Options menu.
To display the EcoLAN 2000E print server name in addition to the SAP ID for all
units:
1. Select Show All under the Options menu.
Because this operation requires that each EcoLAN 2000E be accessed, it may take
a long time to complete if there are many EcoLAN 2000E units on the network.

3.1.3 Extensive On-Line Help

When using the MAP program, there is an extensive on-line help system which fully
explains all of the program's features and menus. The on-line help is context-sensitive.
Browser Based Management 3-2