Network Settings; Registering The Ip Address; Registering The Subnet Mask - Kyocera FS-1118 Operation Manual

Preparations

Network Settings

System Menu/
Counter
or
System Setting
Enter
or
Network Setting
Enter
or
TCP/IP Setting
Enter
or
IP Address
Enter
System Menu/
Counter
or
System Setting
Enter
or
Network Setting
Enter
or
TCP/IP Setting
Enter
or
Subnet Mask
Enter
3-4

Registering the IP Address

Check the IP address with your network administrator before performing this setting.
This will only function if the DHCP setting is Off and the TCP/IP setting is On. Any
changes made to the network settings will become valid after you turn the power to
the machine off and then back on again.
To manually register the IP address.
1
Access IP Address.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Use the numeric keys to enter each segment of the IP address in turn,
pressing or [*.] to move between segments.
3
Press Enter on completion.
If you make an error in entering a portion of the IP address, press
the previous block of digits and re-enter the correct number.
4
Register the Subnet Mask - refer to Registering the Subnet Mask on page 3-4.

Registering the Subnet Mask

1
Access Subnet Mask.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Use the numeric keys to enter each segment of the Subnet Mask in turn,
pressing or [*.] to move between segments.
3
Press Enter on completion.
If you make an error in entering a portion of the Subnet Mask, press
to the previous block of digits and re-enter the correct number.
4
Register the Default Gateway - refer to Registering the Default Gateway on
page 3-5.
to return to
to return
OPERATION GUIDE