Getting connected
For scanning with each utility, the following procedure is needed.
Connect the scanner to a Macintosh computer
<Example connection>
Operation of scanner: Refer to the Set up Edition of the Operation Guide for the scanner.
Operation on Macintosh
ii
Hub
Scanner
Network cable
Basic scanner settings (register the host name and IP address, etc.)
Registering and editing user information
Date/time and time difference settings
Scan to Mac: Refer to Installing Scan to Mac on page 1.
Saves the scanned image as a data file on your computer.
TWAIN for Mac: Refer to Installing TWAIN for Mac on page 5.
Captures the picture image to a TWAIN-compatible application.
Connect the scanner to the Macintosh
computer through a network cable
(100BASE-TX or 10BASE-T).
Macintosh
You're now ready to scan!