Getting Connected - Kyocera KM-2550 Operation Manual

Getting connected

The following procedures are required in order to use this machine as a scanner.
Connect the scanner to your computer
<Example connection>
Hub
Network cable
Perform the required operation at the scanner
Perform the required operation at your computer
PC
iv
Connecting the scanner to your computer
network with a network cable
(100BASE-TX and 10BASE-T)
PC
Basic scanner settings
(register the host name and IP address, etc.)
Date/time and time difference settings
Registering and editing user information
Registers users (transmitters) who use the scanner.
See the Online Manual <Functions Edition>.
Installing the various software (included on the enclosed
CD-ROM disk)
Scanner File Utility
Saves the scanned image as a data file on your computer.
TWAIN Source
Enables you to operate scanning from a TWAIN-compatible application.
Address Book
A personal address book that you can access from the scanner's operation
panel.
Address Editor (Management Tool)
Enables you to register and edit the shared Address Book, make
network-related settings and change various default settings.
Refer to the On-Line Manual <Functions Edition> for more detailed
information on the included software.
You're now ready to scan!
page 2-2
page 2-3
page 2-4