Twain For Mac; Outline Of Twain For Mac; Installation And Uninstallation - Kyocera KM-6030 Operation Manual

2

TWAIN for Mac

Outline of TWAIN for Mac

TWAIN for Mac is a utility that allows scanning from a TWAIN-compatible application and image
capture with easy operation.
TWAIN for Mac can be used on Mac OS 10.1 or later. Also, a TWAIN-compatible application must
be installed.

Installation and uninstallation

Installing TWAIN for Mac
Perform the following procedure to install TWAIN for Mac.
1
Start Macintosh. Close any applications that are running.
2 Insert the supplied CD-ROM into the optical drive.
3 Double-click the CD-ROM icon.
4
Open the [TWAINforMac] folder.
5 Double-click [TWAIN for Mac OS X].
6 The authentication screen is displayed. Enter the administrator name and password and click [OK].
7
The description concerning the license agreement is displayed. To accept the terms and conditions,
click [Accept].
8 Click [Install].
Installation of TWAIN for Mac starts. Follow
the instructions displayed on the screen to
install TWAIN for Mac.
9
After the installation is complete, set the scanner. Click
[Configure] to open [System Preference]. For the
method of setting, refer to Setting the scanner on
page 7.
5