Getting Connected - Kyocera KM-2530 Operation Manual

Getting connected

The following procedures are required in order to use this machine as a scanner.
Connect the scanner to your computer
<Example connection>
Network cable
Perform the required operation at the scanner
Perform the required operation at your computer
PC
iv
Hub
PC
You're now ready to scan!
Connecting the scanner to your
computer network with a network cable
(100BASE-TX and 10BASE-T) ...............
Basic scanner settings
(register the host name and IP address, etc.) .......
Registering and editing user information
(register a new user) .............................................
Installing the various software (included on the
enclosed CD-ROM disk)
Scanner File Utility
Saves the scanned image as a data file on your computer.
TWAIN Source
Enables you to utilize scanned images in a TWAIN-compatible
application.
Address Book
A personal address book that you can access from the scanner's
operation panel.
Address Editor (Management Tool)
Enables you to register and edit the shared Address Book, make
network-related settings and change various default settings.
• Refer to the On-Line Manual <Functions Edition> for more
detailed information on the included software.
Page 2-2
Page 2-2
Page 2-3