How To Name A Protocol (Keypad Only) - Biotek 405 LS Operator's Manual

How to name a protocol
(Keypad only) on the facing
page
3.
Define or modify the plate type using the Previous and Next buttons to
scroll through the supported Plate Types (if applicable).
4.
Select ADD
step: then, select the wash action
or SHAKE
plate's contents.
5.
Define the step's parameters. Press
6.
Keep Added Step?
Select Yes
the current step.
Press Main Menu
*
and select the protocol to run it.

How to name a protocol (Keypad only)

NAME:
-
At the screen when you are creating or editing a protocol, you can enter
Name
up to 16 alphanumeric characters to name the protocol:
Press
Shift
l
key for
Options
Press
Shift +Options
l
Use the arrow keys ◄ ► on either side of the
l
cursor within the display.
Press its Soft-key to add one of the four symbols (- % & _) in the display to
l
the protocol name.
Press
ENTER
l
If the name already exists, an Invalid Protocol Name message displays and
n
you must enter a unique name.
to define the first
to mix or soak the
or No using the Soft-keys to save or discard your inputs for
to end the session at any time. Then, select
% &
+ the number key for
.
A-Z
to reverse direction.
when you are finished to store the protocol name.
Introducing the 405 LS Keypad | 49
protocols to select one. Then, you
can edit the name and plate type,
if desired. Press Enter
EDIT the first step or press the
Options key to scroll to the step
you want to change in a multi-step
protocol.
Enter to proceed.
Save Step Changes?
_
, or scroll through the alphabet with the
A-H
Options
to proceed.
RUN
key to move the
BioTek Instruments, Inc.