Table of Contents
Advertisement
1.800.544.2843
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
After you connect the passive probe, check the probe function and probe
compensation adjustment before making measurements. For details, please refer to
Function Inspection
and
Connect the Active Probe
Take PVA7250 (active differential probe) as an example.
1. Connect the probe head to the preamp of the active probe, as shown in the figure
below.
Figure 5.4 Connecting the Probe Head to the PA of the Active Probe
2. Connect the other end of the preamp to an analog channel input terminal of the
oscilloscope on the front panel, as shown in the figure below. Note that you need
to push the probe to the due position to lock it firmly.
Figure 5.5 Connecting the Active Probe
www.calcert.com
15
10
20
5
25
0
30
Probe Compensation
.
To Prepare for Use
sales@calcert.com
15
Advertisement
Table of Contents
