Examples For Parameter Setting; Description Of Function Code Viewing And Modificationmethod; Parameter Display Mode - HNC Electric HV590 Series User Manual

4.3 Examples for parameter setting

4.3.1 Description of function code viewing and modificationmethod

The operation panel of HV590 inverter adopts three-level menu structure to perform
parameter setting.The three-level menu includes：function parameter group(level1menu)→
function code(level 2 menu)→setting value of function code(level 3 menu).The operation
process is as shown in Figure below.
PRG
PRG
level 0 menu
Caution： When operating on level 3 menu, press PRG key or ENTER key to return to level
2 menu. The difference between ENTER and PRG keys is that pressing ENTER KEY will
save the setup parameter and return to level 2 menu and then automatically shift to the next
function code, while pressing PRG key will directly return to level 2 menu without saving the
parameter, and it will return to the current function code.
Take the modification of function code P3.02(ranging from 10.00Hz to 15.00Hz ) as an
example. (The boldface bit indicates the flashing bit).
PRG
In level 3 menu, if the parameter has no flashing bit, it indicates that the function code
cannot be modified. The possible reasons include：
1) The function code is an unchangeable parameter, such as actual detection parameter,
running record parameter, etc.
2) The function code cannot be modified in running status but can be modified after the
unit is stopped.

4.3.2 Parameter display mode

Parameter display mode is mainly established to view different arrangement forms of
function parameters according to user's actual needs.3 kinds of display mode：
Name
Function parameter mode
User set parameter mode
User modify parameter mode
Section IV. Keyboard Operation
Parameter set
modification
ENTER
PRG
level 1 menu
Table 4-3.1
PRG
ENTER
PRG
Table 4-3.2
Sequence display inverter function parameters ,there are
P0~PF、A0~AF、U0~UF fuction groups respectively.
User set individual function parameters(32 at most), parameters
that needed to be displayed can be set through PE group
Inconsistent with factory default parameters
Table 4-3.1
Function parameter
Function parameter
choice modification value modification
ENTER
ENTER
level 2 menu
PRG
ENTER
Description
32
level 3 menu
ENTER
>>SHIFT