Section I. Product Information; Nameplate Specification; Model Specification - HNC Electric HV590 Series User Manual

HNC frequency inverters have been tested and inspected before leaving the manufacturer.
Before unpacking the product, please check product packaging for shipping damage caused by
careless transportation and whether the specifications and type of the product complies with the
order. If any questions, please contact the supplier of HNC products, or directly contact the
company.
※
Inspect that the contents are complete (one unit of HV590 frequency inverter, one
operation manual).
※
Check the nameplate on the side of the frequency inverter to ensure that the product you
have received is right the one you ordered.
1.1

Nameplate specification

1.2

Model specification

Inverter Series
No. Adaptation
R75 0.75kW
1R5 1.5kW
011 11kW
018 18.5kW
110 110kW
400 400kW
Users check factory models through P0.00. P type is one lower power than G type.
E.g：If you need 11kw P type, 7.5kw G type could be selected as a replacement. Its input
current is the rated input current (20.5A) of 7.5kw G type, but its rated power is that of 11kw
GP unification
G type, and output current is the rated output current(25A) of 11kw G type.
Model
Though inverter hardware of GP unification is different, there are some optimizations of
description
software parameters for different load types .
P type model is only suitable for pump, fan etc light load models, can not work at the rated
current or more than the rated frequency for a long time.

Section I. Product Information

HV590 – R75 G 3
No.
1
2
3
4
No.
G
P
1
Voltage
220V
Single-phase
220V
Three-phase
380V
Three-phase
480V
Three-phase
Inverter Type
General type
Fan pump type