Table of Contents
Advertisement
• Press QUICKMENU and rotate the Select Knob to select SmartCard in
the display.
• Press QUICKMENU again to select and display the SmartCard screen:
3. Rotate the Alpha dial until the desired folder appears in the display. Folders are
labeled A through Z.
Each folder is completely independent. For example, each folder can contain its own
pistons, Tuttis, Crescendo sequences and other settings.
The second line in the SmartCard display shows the number of memories the folder contains
and if a Crescendo sequence is stored, while the third line shows Tutti and the other settings.
If a folder has nothing in it, the second line displays EMPTY.
Storing Crescendo Sequences and Tutti Settings on a SmartCard
In addition to the combination memory levels, the SmartCard can also store copies of
Standard and Alternate Crescendo sequences and Tutti I and II. If a Crescendo or Tutti set
operation is performed while the card is inserted, the new Crescendo sequence or Tutti is
stored on the card rather than in the internal memory. Like the combination memory levels,
Crescendo sequences and/or Tuttis stored on a SmartCard automatically become active
whenever the card is inserted in the slot.
The Memory Card screen will display which Crescendo sequences and Tuttis, if any, are
stored on the card.
Deleting a Crescendo Sequence or Tutti from a SmartCard
To remove a Crescendo sequence from a SmartCard:
1. Select the Crescendo sequence to be deleted (Make sure the ALT CRESC piston
is unlit to select the Standard Crescendo or lit to select the Alternate Crescendo).
S m a r t C a r d
F o l d e r :
M : 1
S m a r t C a r d
F o l d e r :
E M P T Y
34
A
E
Advertisement
Table of Contents
