Sustain/Sostenuto/Soft - Rodgers Trillium T967 Owner's Manual

3. Rotate the Alpha Dial to select the desired Pan value
4. Press either the flashing MIDI coupler or General Cancel ('0') to exit.

Sustain/Sostenuto/Soft

The T967 is equipped with a foot switch which can be programmed to control one of three
MIDI effects: Sustain, Sostenuto or Soft. These three effects are analogous to the types of
pedals found on an acoustic piano. The Sustain function causes all notes to be sustained,
whereas the Sostenuto function sustains only those notes which are held while the switch is
activated (subsequent notes played while the switch is depressed will not be sustained). The
Soft function reduces the overall volume of the voice.
The foot switch is located on the top left edge of the Great/Pedal expression shoe. Press the
switch towards the left to activate the function; release the switch to deactivate.
Each MIDI coupler can be set to perform these functions.
Enabling/Disabling a Foot Switch Function for a MIDI Coupler
To enable or disable a foot switch function for a MIDI coupler:
1. Hold SET and press the MIDI coupler piston (the MIDI coupler will flash).
2. Rotate the Select knob to highlight the FootSw field:
3. Rotate the Alpha dial to select the desired setting (Off, Sust, Sost, or Soft)
4. Press either the flashing MIDI coupler or the General Cancel to exit.
The Foot Switch Function selection procedure is complete. Combination pistons
which are set while the MIDI coupler is activated will also store this setting. A MIDI
Save may be performed to save this setting as the default. See "MIDI Save" on page
80.
Instead of saving, you may press and hold General Cancel ('0') and momentarily press
!
SET to return MIDI couplers to their defaults. This Reset procedure also returns
Voice Palette selections to their defaults.
M I D I C o u p l e r G T A
V e l o c i t y
P a n
F o o t S w
66
6 4
0
O f f