Setting A Piston - Rodgers Trillium T967 Owner's Manual

General pistons
1 – 12
Figure 2. Piston Locations.

Setting a Piston

The Rodgers T967 is equipped with factory registrations, each of which can be used for a
wide variety of wonderful musical effects. However, the contents of any piston can be easily
changed to suit your particular needs.
To set a new registration on a piston:
1. Select the desired stops, couplers and MIDI settings.
2. Press and hold the SET piston, located on the left hand side under the Choir
manual.
3. While continuing to hold SET, press the piston to be programmed.
4. Release both pistons. The new registration is now stored.
!
A memory level must be unlocked before it can be changed. See below.
Swell Divisional
Pistons 1 – 6
Toe pistons Choir Divisional
1 – 12 Pistons 1 – 6
6
Great Divisional Pedal Divisional
Pistons 1 – 6 Pistons 1 – 6