Global Midi Settings; All Notes Off Command; Master Channels - Rodgers Trillium T967 Owner's Manual

3. Rotate the Alpha dial to select the desired setting (Off, Exp or Vol).
4. Press either the flashing MIDI coupler or General Cancel ('0') to exit.
The Expression selection procedure is complete. Combination pistons which are set
while the MIDI coupler is activated will also store the Expression value. A MIDI
Save may be performed to save this setting as the default. See "MIDI Save" on page
80 for more information.
Instead of saving, you may press and hold General Cancel ('0') and momentarily press
!
SET to return MIDI couplers to their defaults. This Reset procedure also returns
Voice Palette selections to their defaults.

Global MIDI Settings

In addition to the various MIDI parameters that can be stored relative to individual MIDI
couplers, there are a number of global MIDI settings which affect the entire instrument. Each of
these will be described in this section.

All Notes Off Command

Occasionally, it is desirable to send a MIDI "All Notes Off" message from a keyboard to
reset notes played by external equipment.
To send an "All Notes Off" message from the T967 Sequencer Out and MIDI Out ports:
1. Press and hold SET then momentarily press General Cancel ('0'). Release both
pistons.
An "All Notes Off" message will be sent on all 16 MIDI channels from both the SEQ
OUT and MIDI OUT ports of the organ.

Master Channels

Much of the discussion about MIDI so far has dealt with the actions of the MIDI couplers;
those controls which allow you to play the instruments in an external MIDI sound module.
However, the stops and divisions of the Rodgers T967 can also be recorded by a sequencer
and played back, either with or without sounds from an external sound module.
M I D I C o u p l e r G T A
R e v e r b
C h o r u s
E x p r e s s i o n
69
0
0
V o l