Table of Contents
Advertisement
Restoring Factory Crescendo Sequences
If desired, the Standard and Alternate Crescendo sequences can be returned to their factory
default settings.
To return the Standard and Alternate Crescendo sequences to factory settings:
1. Make certain the Crescendo sequences are unlocked (see Unlocking and Locking
the Crescendo Sequences on page 22).
2. Press and hold the ALT CRESC piston for approximately five seconds until the
display reads CRESCENDO UNLOCKED.
3. While continuing to hold ALT CRESC, press and hold SET. After an additional
five seconds, the Console Display reads CRESCENDO FACTORY DEFAULT.
4. Release both pistons.
The Crescendo sequences are returned to their factory settings. You may want to lock
them again to prevent accidental changes.
Tremulant Controls
The first section of this manual described how tremulants are activated, what stops they control
and how they are often used. Another impressive feature of the T967 are the User-Adjustable
Tremulants. Although the tremulants are carefully set at the factory and adjusted when the
organ is voiced, each may be modified for rate and depth by the organist to meet a particular
musical need or suit an individual taste.
What's more, the T967 has a number of tremulants per division, each of which can be adjusted
individually. This allows you to custom-tailor a tremulant for a specific family of stops without
affecting the rest of the stops in the division. This tremendous flexibility is a dramatic
improvement over other designs, in which a single tremulant controls an entire division
(sometimes, the entire instrument!).
Following is a list of tremulants which can be easily adjusted, which stops they control and how
they are activated.
24
Advertisement
Table of Contents
