Voice Palette; Making A Voice Palette Selection - Rodgers Trillium T967 Owner's Manual

6. Rotate the Alpha dial to select the desired division.
7. Turn the Select knob clockwise (right) to select the shutter setting.
8. Rotate the Alpha dial to select the desired shutter thickness: pp, ppp, pppp, or
UnEncl.
9. Press General Cancel ('0') to exit.
If the expression shoe is closed and notes are played on voices in the division being adjusted, the
change is heard immediately.
!
All shutter thickness settings are saved when the organ is turned off.

Voice Palette

Many of the speaking stops on the Rodgers T967 have alternate voices that can be selected and
used in performance via Rodgers' exclusive Voice Palette feature. Voice Palette gives you a
tremendous amount of added flexibility; for example, not only can you choose whether to use the
Great Principal 8' stop in a registration, you can also choose whether that particular stop uses
the default Principal 8' rank, or one of the stop's two Voice Palette choices: the Diapason 8'
rank or the Prinzipal 8' rank. Any of these three selections can be used.
Voice Palette was so named because it greatly increases the number of tonal colors at your
disposal; there are many more ranks available to you than the number of actual stops on the
instrument.
Stops with Voice Palette alternatives are denoted with a dot ('•') on the stop face for easy
identification.

Making a Voice Palette Selection

To make a Voice Palette selection:
1. Press and hold the SET piston.
2. Activate the stop to be changed. (For example, select the Pedal Principal 16').
The following screen appears in the display:
V o i c e P a l e t t e
S t o p : P D P R I N C I P L 1 6
V o i c e : P R I N C I P L 1 6*
O P E N W O O D 1 6
46