Power Supply And Wiring - ABB CP420B Installation And Operation Manual

Product Specifications
3.5

Power Supply and Wiring

CP420 must use the power supply with 24 V DC and the power consumption
is 12W.
Warning:
To avoid an electrical shock, be sure to switch off the power before connecting the
communication/download cable to the operator terminal.
Perform the following steps to wire the power connector:
1. Unplug the power connector and unscrew the screws.
2. Strip approximately 7-8 mm of insulation. Insert the wire all the way into
the power connector and then turn the screws tight.
3. Plug in the connector to the power input of the operator terminal.
Note:
The power connector is already plugged into the power input of operator terminal
when the package is first opened.
Use copper conductors only, 60/75
Type
Solid
Stranded
-
FG
DC 24V
12
Wire Gauge Stripped
(AWG) Length
28-12 7-8 mm
30-12 7-8 mm
°
C.
Torque
4.5 lb-in
4.5 lb-in
ABB, 1SBC159102M0202