System Menu - ABB CP420B Installation And Operation Manual

Operation
6.2

System Menu

Set the dip switch SW7 = ON. After the self-test, the system menu of the oper-
ator terminal is displayed on the screen:
The functions of the commands are briefly explained below:
System menu
command
Link The operator terminal is connected.
Confg Sets up the internal time clock and communication parameters
in the operator terminal. All the settings has to made for the
operator terminal to work properly.
Use
the value of the field.
Copy Copies application data to another CP420.
Set Calibrates the touch panel and adjusts LCD contrast.
See also section
Run Runs the application.
16
, , and to move to desired field; + and - to set
6.5 Touch Screen
Function
Calibration.
ABB, 1SBC159102M0202