ABB CP6 WEB Series Start-Up Instructions

Calibrate the Touch of the Display
1. Click on Windows Start.
2. Select Control Panel.
3. Doubleclick on the symbol System Settings.
The system settings tool is a rotating menu through which you
can scroll using the Next and Back buttons.
4. Click on Next until Calibrate Touch appears in blue in the middle.
Doubleclick it and follow the instructions.
5. Exit the rotating menu by pressing the cross in the upper right corner.
Update of the MicroBrowser
If a newer version of the MicroBrowser is available just replace the fi le
My Device\Flash\MicroBrowser\MicroBrowser_CE.exe with the new one copied
on a USB-Stick. Be careful to select the right fi le for your Control Panel type.
Further information
Further information can be found on our homepage
Check there for
• Release notes
• Detailed instructions about the MicroBrowser settings
• Updates of the MicroBrowser
ABB STOTZ-KONTAKT GmbH
Eppelheimer Str. 82 Postfach 10 1680
69123 Heidelberg 69006 Heidelberg
Germany Germany
Telephone +49 (0 ) 6221 701-0
Telefax +49 (0 ) 6221 701-240
E-mail plc.support@de.abb.com
nternet http://www.abb.com/plc
www.abb.com/PLC
2CDC159011M0201 / 08.2011
2CDC 159 011 M0201
CP6xx-WEB Start-Up Instructions
License of MicroBrowser
The CP6xx-WEB Control Panels already contain the license for the MicorBrowser.
Soft Input Panel (SIP)
Instead of connecting a keyboard via the USB
port of the CP6xx-WEB Control Panel, a soft
input panel can be used.
To access the soft input panel click on the red
pencil or grey keyboard symbol on the right cor-
ner of the taskbar.
1. Select Keyboard to activate and Hide Input Panel to deactivate the keyboard.
2. Select LargeKB to activate a larger keyboard and Keyboard to return to the smaller
keyboard.
Setup of the IP Address
If a fi xed IP address is used instead of obtaining an IP address via DHCP.
1. Click on Windows Start.
2. Select Network and Dial-up Connections.
3. Doubleclick on the Ethernet-network symbol: ULTIEMAC1 or EMAC1.
4. Change the IP address of the CP6xx-WEB Control Panel by using the soft input
panel or connected USB-Keyboard.
5. IMPORTANT:
To make this change permanent, exit the Network Connections
and doubleclick on the Registry Save icon on the desktop.
1