System Power - HandyTrac Key Control System Installation & Operating Manual

System Power

1. Plug the HandyTrac Touch power cable
into a UPS Battery Backup. Be sure the
HandyTrac Touch System is connected to a
plug that includes both Battery Backup and
Surge Protection.
2. Turn the system on using the power switch
on the bottom-right of the Touch system
control box.
3. If your system does not power on, check to
make sure the battery is connected in your
UPS battery backup and that it is powered
on. Follow the manufacturer's installation
and safety instructions for your UPS battery
backup.
HandyTrac Touch
Power Switch
UPS Battery Backup
(Customer Supplied)
NOTE: Your warranty will
be voided if a UPS battery
backup is not installed.
User Guide
8