Connecting Using Wireless Connection - HandyTrac Key Control System Installation & Operating Manual

Connecting to a Wireless Network
1. Once the system is powered on and at
the main Time and Date screen, log in
with the Master Badge. If you have the
"No Network" popup on the display,
tap on "OK" to dismiss it to display the
default Time and Date screen.
2. Log in by scanning the Master Badge
through the barcode reader on the
right side of the system, then type in
the PIN using the on-screen keyboard.
3. Make sure that the bar code is facing
to the left when scanning through the
reader.
The Master Badge PIN is listed
on the inside flap of the small
envelope containing the Master
Badge.
If you cannot locate the Master Badge, or if you have any issues logging in with
the Master Badge, please call Technical Support for assistance at 888-458-9994.
HandyTrac Touch
User Guide
10