Double Cabinet Setup - HandyTrac Key Control System Installation & Operating Manual

Installation of Second Cabinet (if applicable)
Install the included spacer on the outside of the Right-Hand cabinet (marked RH).
This will allow enough space for employees to comfortably scan keytags and also provide
protection for the electronic lock and light wiring.
Insert the spacer through outside wiring hole. Thread on the included nut to secure in
Opens to Left
(LH)
Mount the second cabinet the same as the first and feed the cables from the control box
through the spacer. Connect the wiring the same as the first cabinet and clip down wires.
HandyTrac Touch
place.
User Guide
Opens to Right
(RH)
6