HandyTrac Key Control System Installation & Operating Manual page 23

Using Building Pull
(Buildings must be programmed in the system to use Building Pull)
1. Log in to the Handytrac system and
select the Building Pull icon.
3. Select a building from the list. The
cabinet door will open and direct you to
the first available key in the building.
Notes:
• If a key is not in the cabinet, tap "Cancel" to skip to the next unit and continue the
Building Pull.
• If a key is already out, the unit will be skipped.
HandyTrac Touch
2. Select the Activity that will be
performed for the Building Pull.
4. Remove the key for the unit and scan
the key out. Once a key is scanned, the
system will automatically provide the
next key in the building. Continue pulling
and scanning each unit until the building
pull is complete.
User Guide
23