Network Configuration; Initializing The Camera - Dahua Technology IPC-HFW3841E-AS-0280B-S2 Quick Start Manual

2

Network Configuration

Device initialization and IP setting can be finished with the ConfigTool or on webpage. For more
information, see the Web Operation Manual.
Device initialization is available on select models, and it is required at first use and after device is

reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by

default) and the PC stays on the same network segment.
Carefully plan the network segment for the device.

The following figures and pages are for reference only.


Initializing the Camera

Search for the device that needs to be initialized through ConfigTool.
Double-click ConfigTool.exe to open the tool.
1)
Click Modify IP.
2)
Select the searching way, and then click OK.
3)
Select one or several cameras in uninitialized status, and then click Initialize.
4)
Select the devices to be initialized, and then click Initialize.
If you do not provide the email address for password reset, you can reset the password only
through XML file.
Select Auto-check for updates as needed, and then click OK to initialize the device.
Password setting
4
Quick Start Guide