Table of Contents
Advertisement
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see web operation manual.
● Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
● Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay on the same network segment.
● Plan usable network segment properly to connect the device to the network.
● The following figures are for reference only.
2.1 Initializing the Camera
Procedure
Step 1
Search for the device that needs to be initialized through ConfigTool.
1. Double-click ConfigTool.exe to open the tool.
2. Click Modify IP.
3. Select the searching way, and then click OK.
4. Select one or several cameras in uninitialized status, and then click Initialize.
Step 2
Select the devices to be initialized, and then click Initialize.
If you do not provide the email address for password reset, you can reset the password
only through XML file.
2 Network Configuration
Figure 2-1 Password setting
3
Quick Start Guide
Advertisement
Table of Contents
