Advertisement
Quick Links
Advertisement
Related Manuals for Dahua Technology IPC-HFW2449TL-S-LED-0280B-PRO
Summary of Contents for Dahua Technology IPC-HFW2449TL-S-LED-0280B-PRO
- Page 1 Bullet Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0...
- Page 2 Quick Start Guide Foreword General This manual introduces the installation and operations of network camera. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided,...
- Page 3 Quick Start Guide There might be deviations in the description of the technical data, functions and operations, or ● errors in the print. If there is any doubt or dispute, we reserve the right of final explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF ●...
- Page 4 Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it. Transportation Requirements Transport the device under allowed humidity and temperature conditions.
- Page 5 Quick Start Guide We recommend you use the device with a lightning protection device for stronger protection ● against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations. Ground the function earthing portion of the device to improve its reliability (certain models ●...
- Page 6 Quick Start Guide Use the accessories suggested by the manufacturer. Installation and maintenance must be ● performed by qualified professionals. Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on ● the lens. When it is necessary to clean the device, slightly wet a soft cloth with alcohol, and gently wipe away the dirt.
- Page 7 Quick Start Guide Table of Contents Foreword........................................I Important Safeguards and Warnings..............................III 1 Cable..........................................1 2 Network Configuration..................................2 2.1 Initializing the Camera................................2 2.2 Changing the Device IP Address............................2 2.3 Logging in to the Webpage..............................3 3 Installation.........................................4 3.1 Packing List....................................4 3.2 Dimensions....................................
- Page 8 Quick Start Guide 1 Cable Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and water damage. For the detailed operation, see FAQ manual. Figure 1-1 Cables Table 1-1 Cable information Port Name Description Connects to network with network cable.
- Page 9 Quick Start Guide 2 Network Configuration Device initialization and IP configurations can all be managed with the ConfigTool or through the webpage. For more information, see the web operation manual. Device initialization is available on select models, and is required at first-time use and after the ●...
- Page 10 Quick Start Guide The username is admin, and the password should be the one that you set while initializing the device. Select the devices whose IP addresses need to be changed, and then click Modify IP. Step 2 Step 3 Configure IP address.
- Page 11 Quick Start Guide 3 Installation 3.1 Packing List Tools required for installation, such as the electric drill, are not included in the package. ● The operation manual and information on the tools are on the disk or the QR code. ●...
- Page 12 Quick Start Guide 3.3 Installing the Camera 3.3.1 Installation Methods Figure 3-3 Installation methods 3.3.2 (Optional) Installing the SD Card SD card slot is available on select models. ● Disconnect the power before installing or removing the SD card. ● Press the reset button for 10 seconds to reset the device.
- Page 13 Quick Start Guide Figure 3-5 Cable going through the side cable tray...
- Page 14 Quick Start Guide Figure 3-6 Cable going through the mounting surface 3.3.4 (Optional) Installing the Waterproof Connector This section is only necessary if a waterproof connector is included in your package, and the device is installed outdoors.
- Page 15 Quick Start Guide Figure 3-7 Install the waterproof connector 3.3.5 Adjusting the Lens Angle Figure 3-8 Adjust the lens angle...
Need help?
Do you have a question about the IPC-HFW2449TL-S-LED-0280B-PRO and is the answer not in the manual?
Questions and answers