Setting Up An As/400 Systems To Use Lpd; Setting Up A Dec Ultrix; Risc Or Osf1/Alpha Remote Printer - Minolta PageWorks Pro 18 User Manual

6.2.2.5 Setting Up an AS/400 Systems to Use lpd

When working with the output queue description (WORKOUTQD),
there are several fields that must be defined for the NIC to function
properly as a remote printer device.
When prompted for the remote system, type
AS/400 recognizes the device as an IP device.
12. Type PORT1
13. Connection type must be IP.
14. Internet address must be the IP address of the NIC.
15. Destination type must be OTHER.
16. When prompted for transforming SCS to ASCII, type
allow the AS/400 do the character translation.
17. Manufacturer type and model must be the print driver that goes
with your printer.
6.2.2.6 Setting Up a DEC ULTRIX 4.3 RISC or OSF1/
ALPHA Remote Printer
Set up a remote printer on the host that sends jobs to a NIC.
1. At the prompt, type:
#lprsetup
2. Select .
add
3. Enter a name for your printer and press
4. "Do you want more information on specific printer types?"
Press .
Enter
5. A list of ULTRIX-supported printers is listed. Type
press .
Enter
6. Enter a printer synonym (alias) and press
7. Designate a spooler directory or accept the default spooler
directory displayed and press
8. Designate a remote system name and press
9. Designate
PORT1
.
Enter
10. You are asked to enter the name of a printcap symbol from a
displayed list. Type
.
Enter
as the remote system printer name and press
and press
Q
Enter
6.2 UNIX Printing
so the
INTNETADR
YES
.
Enter
remote
.
Enter
.
Enter
.
to
and
6-21