Based on DNS (Domain Name Server)
Select this option to identify printers according to DNS name.
Example:
<PTR-MKTG.DOMAIN.COM>.
4.
After the settings are the way you want, click
close the dialog box.
3.2.3 Adding Printers for IP Peer-to-Peer Print-
ing
The following steps can be used to manually add a printer that cannot be
found automatically due to router setup or the maximum hop count
setting. Note, however, that manual addition of printer is normally not
required.
Step 1:Use P2P-IP to make the printer an IP peer-to-peer printer.
1.
Click
, point to
Start
2.
Click
P2P-IP
3.
Click the
Printers
printer.
3.2 IP Peer-to-Peer Printing Program
, and then point to
Programs
to display the Peer-to-Peer IP Setup dialog box.
button to display a dialog box for input of a new
OK
to set them and
.
P2p-ip
3-9