Setting Up An Aix 4.0 System - Minolta PageWorks Pro 18 User Manual

6. When a window appears, change the values shown to configure
the NIC. The values displayed are default values. You must
replace the short and long form filter values with the values
shown below.
Requested Informa-
tion Input Data
Name of queue to add printer1
queue Destination
Host
Short Form Filter
Long Form Filter
Name of remote
printer queue
Name of device to add print1
7. After you have replaced all values, press
You can now print.

6.2.2.3 Setting Up an AIX 4.0 System

Use the following procedures to install a NIC in an AIX 4.0 system:
1. Run SMIT Printer.
2. Select
Print Spooling
3. Select Add a Print Queue.
4. Select
Remote
5. Use
Standard Processing
6. Assign a queue name.
7. Use the host address of the NIC for the Remote System.
8. Use PORT1
9. Add a description (optional).
10. Press
Enter
Example
printfast
/usr/lpd/bsdshort Required value
/usr/lpd/bsdlong
PORT1
.
.
.
for the queue on the remote system.
to generate.
6.2 UNIX Printing
Description of
Input Data
Name of local
printer
NIC hostname as in
/etc/hosts
Required value
NIC
Name of local
queue
.
Enter
6-19