Url Notification; Setting The Error Notification Destination - Minolta CN3102Pro User Manual

Using the Scanner Mode
2.4

URL Notification

The URL notification function is used to notify using an e-mail the URL
indicating the storage location of the image data that the scan function
created. The image data is not attached to the URL notification mail. The
side receiving the URL notification mail can double-click the URL written
in the e-mail text to access the storage location of the image data.
A URL notification mail is transmitted in the following cases.
When the size of the mail exceeds the upper limit specified by Maximum
Scan File Size (see p. 2-14) on the Scan to E-mail function
In this case, the image data is saved to the controller HDD, and a URL
indicating the storage location is transmitted by mail.
2.5

Setting the Error Notification Destination

You can carry out the following steps to specify the destination to notify
errors when mails transmitted using the Scan to E-mail, do not reach the
destination address. However, if the mail is not transmitted, the error is
not notified.
1
Show the setup screen from the controller operation panel.
2
Select [Network Setup] — [Service Setup] — E-Mail Setup and enter
the following settings.
m
[Administrator Email User Name]:
Specify the E-mail user name of the controller administrator.
m [Administrator Email Domain Name]:
Specify the mail server domain name to which the administrator
belongs.
NOTE
è Administrator Email User Name@Administrator Email Domain Name
is the error notification destination.
CN3102Pro
2
2-11