2.
Type
again and press
1
appear:
The Configuration Utility
Unit Serial no. 460121 V5.04
1. IP Address
2. Subnet Mask
3. Default Gateway 199.9.200.254
4. Base Port Number 10000
3.
Enter a new IP Address and press
to change Subnet Mask and Default gateways.
4.
Enter
to change the base port number.
4
Note
• The base port number is one less than the actual TCP/IP port number
used by the printer. For example, to set the port number to 9100, enter
9099.
6.3.3 Select Printer Languages
Selection 2 in the Main Menu allows you to designate which
emulations (printer interpreter languages) the printer supports. This is
to allow the resident lpd to modify files intended for other emulations
so that they may be printed. The menu also allows you to enable or
disable banners attached to lpd handled jobs.
The emulation choices are Printer Control Language (PCL), PostScript
(PS), ASCII (simple text) and Other (any print job not recognized as
PCL, PS, or ASCII). The file modifications and conditions are:
. The IP Address submenu will
Enter
192.9.200.200
255.255.255.0
. Repeat the previous steps
Enter
6.3 Running Telnet
6-41