4.2 Configuring NetWare 4.x — Bindery Emulation
Note
• The command at the console prompt takes effect immediately. The def-
inition in the autoexec.ncf file takes effect when the server is shut down
and then restarted.
4.2.2 Configure in Bindery Mode with
PCONSOLE
Once you confirm the server has Bindery Context, use the following
procedure to configure the NIC.
1.
Log into the network as ADMIN.
2.
Type
PCONSOLE
3.
When the
Available Options
Bindery Mode).
Note
• If you receive a message asking you to login to a server with Bindery
connections, the server you are attached to does not have Bindery
Mode enabled. Follow the procedures in 4.2.1 Confirm Bindery Con-
text or log onto a server with Bindery Services activated.
4.
From the
Available Options
.
Enter
and press
. The following screen appears.
Enter
Available Options
Print Queues
Printers
Print Drivers
Quick Setup
Change Context
menu appears, press
screen, select
(for the
F4
and press
Quick Setup
4-11