5.2 Loading the AppleTalk NIManage Utility Program
10. The options available at this point depend on your printer driver.
With a typical driver, you may select
. There will be a series of messages as the Chooser commu-
SETUP
nicates with the printer and locates the proper PPD. The setup
screen will return, listing the PPD file selected. Select
exit from Chooser.
5.2 Loading the AppleTalk NIManage
Utility Program
The AppleTalk NIManage utility program has the following functions:
•
View the names of the printer or printer zone.
•
Enable or disable the status report.
•
View the error log.
•
Enable or disable other protocols and view or modify the TCP/IP
address, subnet mask, and default gateway address.
Use the following procedure to get access to AppleTalk NIManage
utility program:
1.
Insert the CD-ROM into the CD-ROM drive.
2.
Double-click the
3.
Click the
CD-ROM Contents
screen.
4.
Click
Installation/Configuration Program
of the Introduction screen.
5.
Select the
NIManage AppleTalk Administration Program
to start the NIManage program. The Zone and Device screen is
displayed.
5-2
icon from the CD-ROM.
NIC mac
button to display the Introduction
SETUP
. Then select
OK
located at the bottom
AUTO
. Then
item