Setting Up An Hp/Ux Remote Printer To Use Lpd - Minolta PageWorks Pro 18 User Manual

6.2 UNIX Printing
Installation is complete. Test your printer by executing the following
command:
#lp -d<queue_name> <file_name>
6.2.2.4 Setting Up an HP/UX Remote Printer to Use
lpd
Set up a remote printer on the host that sends jobs to a NIC using the
NIC lpd.
1. At the prompt, type:
#sam
2. When a window appears, select
3. When the menu appears, select
4. When a list appears, select
5. From the pull-down menu, select
6. When a window appears, add values to configure NIC. See the
following example.
Input Requested
Printer Name
Remote System
Name
Remote printer Name
7. At the bottom of the screen, select
from the three choices available.
tem
8. Click on the
9. Ping the unit to test communications. Type:
#ping <NIC IP address>
10. Ping should confirm your IP address with the message:
<NIC IP address> is alive
11. If the connection is confirmed, you can now print.
6-20
Actions in the title bar
Example
printer1
printfast NIC hostname as in /etc/hosts
PORT1
button.
OK
Printer/Plotter Manager
List printer and plotters
Add Remote Printer
Description of Input Data
name to be used in lp com-
mand
lpd queue name
Remote Printer is on BSD sys-
.
.
.
.