3.1 Discovery Program – Management Access Program (MAP) –
3.1 Discovery Program – Management Access Program (MAP)
You can use the following procedure to manually install the MAP.
1.
Insert the CD-ROM into your workstation's CD-ROM drive.
2.
Run the program. (In this example, we assume that drive D: is
your workstation's CD-ROM drive.)
D:\Map\Setup.exe
3.
Follow the instructions that appear on the screen.
The default installation directory is C:\Program Files\Map. You can
change to a different directory if you want.
3.1.2 Configuring the MAP
1.
Click
Start
, point to
2.
Click
MAP Setup
Search for IPX based printers:
Check this option to search for IPX/SPX based printers.
Search for IP based printers:
Check this option to search for TCP/IP based printers.
Max Hops for IP Search:
Type in a maximum hop value. The initial default value is 2.
Programs
, and then point to
.
MAP
.
3-3