Interfaces
SCSI
Standard
RAM
Internal Hard Disk
Size
Electrical Requirements
Power
Requirements
Frequency
Power
Consumption
T e c h n i c a l S p e c i f i c a t i o n s
Hexdump
Lineprinter
Optional emulations
LocalTalk, parallel, serial, SCSI, optional network
interface
See "Cable Pinouts," later in this chapter, for more
information.
Supports optional SCSI disks, up to a 512 MB.
magicolor Plus
12 or 24 MB RAM (upgradable to 64 MB)
magicolor
12 or 28 MB RAM (upgradable to 64 MB)
80 MB IDE drive
(Upgradeable to 512 MB.)
120 V 10%
60 Hz ( 2Hz)
Standby
1000 W max.; 150 W ave.
Operation
1000 W max.; 250 W ave.
Energy Saver Mode*
less than 45* W
*Available only on Energy Star models of the
magicolor Plus printer when Energy Saver mode is
Appendix B
B - 3