Table of Contents
Advertisement
Installing System Software and Fonts from a PC to a
Non-Functional Printer
Follow these instructions to download system software and fonts
from a PC to a non-functional printer:
NOTE: These files take up about 5.5 MB of disk space when
1.
Insert the System Software/DOS disk (provided with your
printer) into your PC's floppy disk drive.
2.
At the DOS C:\ prompt, type the following command to
extract the system software file to your PC's hard disk:
If the system software disk is in another drive, substitute the
name of that drive for a.
3.
Insert the System Fonts 1/DOS disk into your PC's floppy disk
drive.
4.
Type the following command to extract the first PostScript
fonts file to your PC's hard disk:
5.
Insert the System Fonts 2/DOS disk into your PC's floppy disk
drive.
6.
Type the following command to extract the second PostScript
fonts file to your PC's hard disk:
7.
Insert the PCL 5 Fonts/DOS disk into your PC's floppy disk
drive.
P r i n t e r O p t i o n s
extracted.
md \qmssys
cd \qmssys
a:system
a:af2psfn1
a:af2psfn2
Chapter 8
8 - 5 3
Advertisement
Table of Contents
