Table of Contents
Advertisement
Step3-1 The peak will turn white. The white peak will not be included in the
calculation. The order of the peaks will be rearranged.
Step4 Base Line: This feature is used to help you increase (or cut off) the
peaks you want (or do not want) to include in the quantification step.
Press Base Line button (as box 1) a green line will show up on the
screen, you could move the line to the position you desiredand the
peaks above the base line will be selected, then press
to confirm it.
1
2
65
(as box 2)
Advertisement
Table of Contents
